Why Does Your Furnace Keep Tripping the Reset Button in Morriston, FL?

Are you pushing your furnace reset button multiple times each week? This is usually a sign that you’ll be better off scheduling an overdue furnace repair in Morriston, FL.

Occasionally pushing this button isn’t a major cause for concern. However, frequent resets suggest you have furnace ignition problems or other related issues that are safer to address as soon as possible.

Are you wondering, “Why do I have to keep resetting my furnace in Morriston, FL?” Why not contact Fast Air Heating & Cooling to determine why your heating system is constantly tripping? If you’d like to begin furnace troubleshooting in the meantime, we’ve listed several potential reasons below.

Your Unit’s Air Filter Is Dirty

You don’t necessarily need to know how a furnace works inside and out to keep it well-maintained. Homeowners can ensure a heating system stays in good shape simply by replacing its air filter every few months!

With the temperatures in Morriston, Florida, rarely dropping below 50 degrees, you shouldn’t have to turn on your furnace all that often. But when you do, it will rely on its air filter to remove dirt, dust, allergens, and other particulates from your home’s air.

Over time, this air filter will become clogged. If you don’t replace it in time, the delay could put a huge strain on your entire system and cause furnace overheating issues. 

Your Flame Sensor Is Faulty

Why do I have to keep resetting my furnace in Morriston, FL? One reason might involve your furnace having a special sensor that is designed to detect its flame. 

When this sensor gets too dirty or has a fault, it might not be able to detect the flame properly. A faulty flame sensor will stop the unit from operating normally. If so, you might wonder why you have to reset the unit repeatedly over a single day. 

The answer to this one is easy: bring in a reputable HVAC company like Fast Air Heating & Cooling to look at your furnace. Professional inspections cover cleanings and replacements as needed.

Your Thermostat Isn’t Working Properly

Is your furnace short-cycling? If so, you’ll notice that it turns on and then shuts back off too soon to be of real value. The short-cycling could prevent your heating system from warming your home on chilly days and nights as well as wear the furnace out faster.

Why do I have to keep resetting my furnace in Morriston, FL? Various factors can cause short-cycling, including a malfunctioning thermostat. Something as simple as a loose wire in your thermostat could be the problem, so start there.

Your Furnace Is Experiencing Electrical Issues

Like other household appliances, your home’s furnace contains countless electrical components. If the wiring for your heating system sustains damage, you might have to reset it more than usual due to faulty connections.

Tripped circuit breakers and power surges could also be the root of your furnace problem. All of these scenarios will require attention from a licensed HVAC technician, such as Fast Air Heating & Cooling.

Your Furnace Isn’t Getting Enough Fuel

If you depend on a gas or oil furnace to heat your home, is it accessing enough fuel to run efficiently? Are you asking, “Why do I have to keep resetting my furnace in Morriston, FL?” Sometimes, it’s a fuel injection issue or damage to the fuel line that’s connected to your heating system.

Shut off your heating system. You’ll want to schedule a professional inspection before you use the furnace again. Fuel can be a fire hazard.

When You Have To Keep Resetting Your Furnace in Morriston, Florida, Here’s What To Do 

If your furnace’s reset button trips more often than it should, try replacing your air filter or tinkering with your thermostat. If you aren’t having any luck, reach out to an experienced HVAC company like Fast Air Heating & Cooling. 

Ignoring the resets could lead to even more serious problems down the line, including costly repairs. You will soon have to replace your heating system altogether.